Space environment tools / Radio communications

RF Link Simulator

Design a satellite radio, fly it over a ground station, and decode the signal that actually arrives.

Radio and orbit settings

Ground station receiver

Loading the payload image…
Starting the receiver…
Constellation
Spectrum after Doppler pre-correction
Downlinked image
Clean Corrected CRC failed Not received
Loading…
—
Pass +00:00
Margin ≥ 3 dB 0 to 3 dB Below 0 dB Elevation This transmission

Awaiting transmission

The receiver acquires the carrier, recovers symbols, and decodes CCSDS frames.

Frames received—
Channel bit error rate—
Bit errors after decoding—
Measured Es/N0—
Carrier acquisition—
Sync re-acquisitions—
Airtime—
Simulated samples—

Carrier tracking during the transmission

Frame-by-frame results
FrameSent at s into transmissionPredicted Es/N0 dBChannel bit errorsBit errors after ViterbiReed–SolomonResult

The SigMF recording holds the first 262,144 complex samples after Doppler pre-correction, at four samples per symbol. GNU Radio, inspectrum and SigMF tools can open it.